We are currently dealer for the Capstan Portable Winch and accessories products. The list bellow present you the products that we suggest you for your personal or professional needs. If you need further informations with any of those items feel free to contact us.
Lightweight, portable, gas-powered winch, with 2200 lb (1000 kg) pulling capacity. If you ever need to bring down hung-up trees, pull out-of-reach logs, get a vehicle un-stuck, or haul a moose out of the bush or water, the Portable WinchTM is for you. Weighing only 35 lb (16 kg), the Portable Winch is easily carried and can be anchored to anything using the 6' (1.83 m) long sling provided or the hitch plate for vehicles.
Use the Portable WinchTM with any length of low stretch rope. We offer double-braided polyester rope in lengths of 164' (50 m), 328' (100 m), 492' (150 m) and 656' (200 m). The rope is tied to the object to be moved and wound three times around the capstan drum. When the engine is running, the capstan rotates continuously and the friction created by pulling on the free end of the rope pulls the object. Load will move at a speed from 25 to 40 feet/minute (7.6 to 12 meters/minute), depending on the weight of the load.
PCW-5000 Engine: HondaTM 4-Stroke, GHX-50 cc Line speed: 25-60 ft/min (7.6-12 m/min) Direct line pull: 2200 lb (1000 kg) Weight: 35 lb (16 kg)
Use the optional capstan drum to add speed to your work. Easily installed, this drum will allow you to do jobs that require less pulling capacity quicker.
PCA-1100 Diameter: 3-3/8" (85 mm) Drum weight: 1.7 lb (770 g) Max. line speed: 60 ft/min (18 m/min) Speed at max. torque: 37 ft/min (11 m/min Max. line pull: 1350 lb (614 kg)
With a breakpoint of approximately 4200 lb (1900 kg) for 3/8'' (9.5 mm) and 8100 lb (3674 kg) for 1/2'' (13 mm), this rope is available in lengths of 150' (45.75 m), 300' (91.5 m) and 600' (183 m). (Special lengths are available on special order). It features double-braid construction for durability and low-stretch properties for safety. Its low cost and abrasion resistance make it a good choice for use with our Portable WinchTM when it is subject to friction and heat.
PCA-1200 à PCA-1216M Tensile strength: 3/8'' (9.5 mm) – 4200 lb (1900 kg) 1/2'' (13 mm) – 8100 lb (3674 kg) Weight per 100' (30.5 m): 3/8'' (9.5 mm) – 4.6 lb (2.1 kg) 1/2'' (13 mm) – 6.5 lb (3 kg) Lengths available: PCA-1200: 3/8'' (9.5 mm) - Sold by the meter (1 meter = 3.3 feet) PCA-1215MM: 1/2'' (13 mm) x 164' (50 m) PCA-1213MM: 1/2'' (13 mm) x 328' (100 m) PCA-1214MM: 1/2'' (13 mm) x 492' (150 m) PCA-1216MM: 1/2'' (13 mm) x 556' (200 m) (Special lengths are available on special order) Stretch: Only 12% at break point
Ideal to carry/store your ropes and small accessories around the woodlot or any location and prevents tangling. Made out of nylon material, these bags will store up to 600' (183 m) of 1/2'' (13 mm) rope.
PCA-1252, PCA-1255 et PCA-1257 Available in four (4) models: PCA-1252: Bag with shoulder straps Small – Holds up to 164' (50 m) of 1/2'' (13 mm) PCA-1255: Bag without shoulder straps Small – Holds up to 164' (50 m) of 1/2'' (13 mm) PCA-1256: Bag with shoulder straps Large – Holds up to 328' (100 m) of 1/2'' (13 mm) PCA-1257: Bag without shoulder straps X- Large – Holds up to 492' (150 m) of 1/2'' (13 mm)
The slings fasten the winch or snatch block to a tree, without damaging the bark or cambium of anchor trees. The polyester sling will not stretch. It is very useful for lifting or used as a choker. Safe working load is 6400 lb (2903 kg) when used basket style (i.e. when anchoring the winch), or 4800 lb (2182 kg) in choker style (i.e. when anchoring the corner block).
PCA-1258, PCA-1259 & PCA-1260 Available: PCA-1258: 10' x 2'' (3.1 m x 50 mm) PCA-1259: 8' x 2'' (2.44 m x 50 mm PCA-1260: 6' x 2'' (1.83 m x 50 mm)
The hitch plate turns your pick-up truck or ATV into a pulling machine. Simply hook the winch to the plate using the safety hooks and slide the key-hole shape over your ball hitch and you're ready to pull.
PCA-1261 Fits balls up to 2'' (50 mm) diameter Weight: 1-3/4 lb (800 g)
This receiver hitch is ideal to attach the winch to your vehicle. Its 2'' (50 mm) square tubing fits perfectly in Category III hitch receivers. Cushioned winch support plate pivots 45 degrees on either side, making the winch stable and self-aligning with the load.
PCA-1262 Fits square receiver of 2'' (50 mm) Weight: 15 lb (6.8 gk)
Tree/pole mount with rubber pads, anchor strap 75 mm wide x 3 m long (3'' x 9.8'). This anchor system allows you to firmly attach the winch on a tree or a post which makes it easier for working from one point for extended periods of time. The winch can therefore be installed at a more comfortable height and the pivoting support aligns the winch automatically with the load. To use it, you will need the receiver hitch winch anchor for 50 mm (2'') square tubing (PCA-1262).
PCA-1263 Tree/Pole minimal diameter: 12'' (30 cm) Tree/Pole maximum diameter: 36'' (91 cm) with the 9.8' (3 m) sling included Weight: 15 lb (7 kg)
This system was designed for vertical pulling. The 50 mm (2'') square tubing fits on the tree/pole mount (PCA-1263). It is designed so the rope goes through the pulley and then right up. It offers a solid support and is ideal for pulling electrical cables through conduits. Used with the tree/pole mount (PCA-1263) sold separately.
PCA-1264 Weight: 15 lb (7 kg)
The self-locking pulley is designed for rescue operations. It features a brake cam system which allows the rope to go through freely in one direction and blocks it in the other direction. The spring-loaded cam can be disengaged by pulling a release cord. The 2-3/8" (60 mm) diameter aluminum pulley is mounted on self-lubricating bushing and stainless steel axle. The swing sides are also made of anodized aluminum.
PCA-1271 Minimum break strength : 40 kN (9000 lb) CE certified For ropes from 9.5 mm (3/8'') to 13 mm (1/2'') Weight : 0.6 kg (1.44 lb)
The self-locking pulley is designed for rescue operations. It features a brake cam system which allows the rope to go through freely in one direction and blocks it in the other direction. The spring-loaded cam can be disengaged by pulling a release cord. When used in a system (with a matching double pulley), it can give you 4:1 mechanical advantage. Both 3" (75 mm) diameter aluminum pulleys are mounted on self-lubricating bushings and stainless steel axles. The swing sides and the main plate are also made of anodized aluminum.
PCA-1272 Minimum break strength: 12 000 lb (53.6 kN) CE and NFPA certified For ropes from 3/8'' to 1/2'' (10 mm to 13 mm) Weight: 2.5 lb (1 kg)
The swing-side snatch block features a lightweight 4'' (100 mm) diameter deep groove aluminum sheave, with stainless steel plates that swing open to install rope. Sintered bronze bushing on stainless steel shaft provides 98% efficiency. Particularly useful for use when doubling the line, the ropes cannot accidentally come out of the block. Use the Steel locking carabiner to anchor to a Polyester slings.
PCA-1274 Minimum break strength: 10 000 lb (44 kN) Weight: 2.5 lb (1.14 kg)
For extra heavy loads, you can multiply the winch power using pulleys. This double pulley features the same aluminum and stainless steel construction as our PCA-1274 with two 4'' (100 mm) diameter deep groove aluminum sheave. Using one double pulley (positioned at the load) with a single pulley, you can triple the pulling power of the winch to 7500 lb (3400 kg). With two double pulleys, an amazing 10000 lb of force can be exerted on a load!
PCA-1273 Minimum break strength: 25000 lb (110 kN) Weight: 4.4 lb (2 kg)
Use the locking carabiner to anchor the swing side snatch block or as an anchor for doubling the ropes. Nickel plated with anodized aluminum screw gate lock.
PCA-1276 Minimum break strength: 5000 lb (22 kN) Weight: 6 oz (150 g)
PCA-1277 à PCA-1279 PCA-1279 – 13 mm (1/2") – Working load limit : 2 tons PCA-1277 – 16 mm (5/8") – Working load limit : 3-1/4 tons PCA-1279 – 20 mm (3/4") – Working load limit : 4-3/4 tons
A 5/16" (7 mm) opening will grab either 5/16" (7 mm) or 1/4" (6 mm) chain. Equipped with a 1/2" (13 mm) diameter grommet, it can be attached to any 1/2" (13 mm) ropes or smaller. Attach the hook to the ropes using the bowline knot. The bowline knot provides a secure connection, and can be untied if required.
PCA-1280 Weight: 0.5 lb (225 g)
Its unique latch prevents the chain from slipping out of the hook when tension is not applied on the ropes. A 5/16" (7 mm) opening will grab either 5/16" (7 mm) or 1/4'' (6 mm) chain. Equipped with a 1/2" (13 mm) diameter grommet, it can be attached to any 1/2" (13 mm) rope or smaller. Attach the hook to the rope using the bowline knot. The bowline knot provides a secure connection, and can be untied if required.
PCA-1282 Weight: 1.1 lb (500 g)
Install on your ropes or at the load when using the snatch block; the hook has a spring-loaded safety clasp which will prevent the hook from slipping off.
PCA-1281 Safe working load: 3/4 ton Weight: 10 oz (300 g)
The skidding cone will prevent logs from being stopped by roots, stumps or residual trees. It also protects your valuable trees along the skid path from being damaged. Made of high-performance polymer plastic, the skidding cone is strong, yet flexible. Its 20" (51 cm) opening allows you to haul large logs or bunches of smaller logs or brush. Use it year round, down to temperatures of -30°C (-22°F).
PCA-1290 Material: Polymer Weight: 12 lb (5.5 kg) Opening Diameter: 20" (51 cm) Height: 26.5" (67 cm)
Our 12-strand hollow braid rope made of Dyneema SK-75 high-performance fiber is now available to replace wire rope winch lines. Extensive field testing by FERIC researchers have proven that SYNTHETIC MAINLINETM rope can outlast wire rope many time
SYNTHETIC MAINLINETM rope is the same diameter as equivalent strength wire rope, yet weighs 9 times less! Coated with urethane, supplied with factory crafted eye-splice with safety hook. Experience the feel of high technology!
PCA-31650-H et PCA-1450-H PCA-31650-H : 3/16'' x 50' (4.8 mm x 15 m) Minimum break strength : 4600 lb (2085 kg) For winches up to 2000 lb (905 kg) PCA-1450-H : 1/4'' x 50' (6 mm x 15 m) Minimum break strength : 7500 lb (3400 kg) For winches up to 3500 lb (1585 kg) Ropes of other diameter and lengths available on request
High Performance Polyethylene (HPPE) is among the world’s strongest fibers. HPPE ropes have been used in marine and industrial applications for years; we now offer HPPE chokers to replace choker-chains. Made of 3/8'' (9.5 mm) diameter HPPE rope with 15000 lb (6800 kg) minimum breaking strength, they are extremely strong, durable, and lightweight. Three links of 1/4'' (6 mm) chain and a 12'' (30 cm) metal rod at one end make it easy to install and provide an anchor point for a grab hook. A spliced eye at the other end is used to 'choke' the log. A true pleasure to work with, well worth the extra money.
PCA-1372 Length: 7' (2.1 m) Weight: 12 oz (350 g)
Made of 1/4" (6 mm), grade 70 steel, the choker-chain is equipped with a special C-hook for quick, secure installation and removal and a 12" (30 cm) long 'needle' letting you slide it easily under logs or through the Skidding cone.
PCA-1295 Length: 7' (2.1 m) Weight: 6 lb (2.8 kg)
Convert an existing chain to an efficient choker-chain. It’s quick, has a secure chain installation and is easy to remove. Installs easily on 5/16" (7 mm) or 1/4" (6 mm) chain.
PCA-1299 Length: 7' (2.1 m) Weight: 10 oz (300 g) Price: 12.00 $ + HST
A padded waterproof case with removable casters and folding handle allows secure transportation and storage of the Portable winch. The case, which carries a lifetime warranty, will store and protect the winch, rope and many accessories. Carry your winch without any worries. Ideal for trips in rugged areas.
PCA-0340 Dimensions: Outside: 20'' x 20'' x 19'' high (50 cm x 50 cm x 48 cm) Inside: 18'' x 18'' x 17.5'' high (46 cm x 46 cm x 44.5 cm) Weight: 28 lb (12.7 kg)
Transport and store your Portable winch securely in this rugged case. Made of high-impact plastic with molded locations for the winch and many accessories. Protect your investment while on the move! It also keeps all accessories in one place while in storage.
PCA-0100 Dimensions : Outside: 21.5'' x 25'' x 16'' high (54.5 cm x 63.5 cm x 40.5 cm) Inside: 19'' x 19'' x 15'' high (48 cm x 48 cm x 38 cm) Weight: 15 lb (6.8 kg)
A spark arrestor will prevent carbon deposit from being ejected from the engine and igniting a fire. Spark arrestors are mandatory on some public lands. Please check local regulations. Easily installed with #2 Phillips screwdriver.
PCA-1151 Price: 16.95 $ + HST
The corner block lets you change the line pull direction of a log to avoid obstacles or to position it parallel to the trail. The corner block is therefore very useful with the Portable WinchTM to get some lift on the rope or to double your line (and power). Use it with the pulley facing down for best results.
PCA-1270 Pulley diameter: 4" (10 cm) Weight: 5 lb (2.28 kg)
Makes it easy to attach a polyester rope or a choker-chain to an ATV. Fits over 1 7/8" or 2" (47 mm or 50 mm) ball hitch. Slide the pulling plate over your ball hitch, and fasten your load to it quickly and securely. Attach your rope to the 2" (50 mm) post using the clove hitch, or insert a link of chain into the slotted plate to pull your load. Pulling from the axle level provides the safest pulling point on your ATV. Use the capstan knot to do it.
PCA-1310 Facilite l’attache d’un câble ou d’une chaîne-élingue au QUAD. Fits over 1-7/8" or 2" (47 mm or 50 mm) ball hitch
An ingenious device for releasing the rope from the pulley to allow a log to ‘turn’ into the trail. Depending on the distance the anchor tree is from the trail, you may adjust the automatic release to make the rope slip out of the pulley at the appropriate moment. Simply turn the chain link one-half turn around the rope and insert it into the metal cartridge. Ideal to use with an ATV when you don’t want to stop in the middle of the operation.
PCA-1291 Rope maximum diameter: 1/2'' (13 mm) Poids : 0,45 kg (1 lb)
